NEW Super Starter(For Helicopter)
Specifications:
•Suitable battery:Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
•No load rotation speed:2300rpm
•Battery undervoltage:10.8V
•Quiescent current:0 mA
•Motor overheat protection:80°C
•Decelerate gear ratio:5.3:1
•Size:80x60x390mm
•Weight:700g (w/o battery)
Instructions:
COMING SOON ........Starter Mount for Sullivan Dynatron
Remote glow plug adapter
All Glow HelisTired of having to remove the canopy every time you need to glow start your Heli. With the remote glow plug adapter you can mount the extension anywhere on the side or front of the Helicopter so starting will never mean messing with the canopy ever again. Available from Revolution and from TTR
Mighty Midget Igniter--
All Glow HelisThe Mighty Midget Igniter is so small and compact it is the most conveniant to carry around when walking towards your model (usually when needing to restart the engine ). It includes wall charger, Locks onto glow plugs, small and powerful. 3" long total length with a shaft length of 1". Just the right size to throw into a shirt pocket. 1000 mAh 4/5 Sub C Cell
KSJ HEX STARTER SHAFT WITH BUILT IN ONE WAY MECHANISM
All Glow HelisUse the long starter shaft to connect to your engine and start it. The starter comes equipped with a one way mechanism so the electric starter will not bog down the engine after it starts and so it will disengage; a very important feature for prolonging the life of your valuable engine.
PRO DRIVER SUPERGLOW- STARTER WITH TESTER AND NiMH BATTERY
Don’t be fooled by its small size, this Powerful Glow Starter kit comes complete with a NiMH battery ( the yellow base is the battery pack ), a NiMH charger, an LED meter so you can see the current capacity, a long cord so you can easily reach hard to get to glow plugs and a glow plug tester which is built onto the base of the module. This is a very powerful glow starter which lasts for many “starts” without a charge. The Yellow casing is made very strong so it may take